Maas - Diesel Forklifts | Battery Pallet Truck | Stackers

Innovation Power Train System

(This function belongs to option not for standard model)

Maas Internal combustion Forklifts utilize innovation power train system - PSD axle for some special order or high demand applications.

PSD Axle Technical Advantage

Safer
New auto-parking brake system - Wet Brake

In an emergency, this Brake System stops vehicles automatically

More Compact

New Service Brake System
Simplify the service brake system
Compact size & Flexible mounting (50% less weight & volume)
A transmission is built inside axle housing

More Functional
Anti-Rollback

Adopting a one way clutch to prevent it from rolling back on the slop

Complete Hydraulic Steering System

Eliminate friction and prevent over turning and resilience
Reduce components and maintenance
Lower noise and less inner leakage
A little amount of oil ensure the diversion much easier and more flexible

Powerful Cooling System

With an extra-large radiator, the heat dissipation area and radiator volume are 1.25 times of normal radiator. The special structure of heat dissipation not only guards against overheat of engine, but also cuts servicing. Our cooling system is suitable for you in hot area.

Intelligent Instrument Clusters

Self-diagnose and high accuracy sensor remind operator for regular service and increase safety.

High Air Intake

Air intake in high position which keep away dirt and improve engine efficiency and operate life

Strong Structure Exhaust Pipe

Double-layer stainless steel exhaust pipe is solution for rupture by vibration of engine start. This structure keeps the operation life, more durable than single-layer and the tenacity also higher than double-layer iron structure.

Excellent Lift Hydraulic System

Safety valve prevent fork dropping suddenly when hydraulic hose damage.
Tilt locking valve cut tilt cylinder and keep stopping mast tilt angle when engine stop.
Flow control valve prevent lift cylinder dropping suddenly when under loading state.

Intelligent Active Safety System With Seat Sensor

(This function belongs to option not for standard model)

Intelligent control system with sensor under seat and safety belt. The system need sensor tests the weight and operator ties safety belt on seat at the same time, then the start button will work.

Front Light Guard

We focus every parts of our Forklifts, even very small point will show our carefulness.

Back Mirror

Wide vision back mirror keeps safety while working.

Full-float Structure

Maas utilizes a full-float structure, which locates an engine and Forklifts body away from vibration. It will reduce vibration. Specifically, the rubber mount is the key to vibration absorption, and we execute thorough low vibration measures, such as developing our original material and shape that are superior in vibration absorption. This structure also helps reduce the noise.

Suspension Seat

The comfortable genuine leather seat has handrails and safety belt. The seat can horizontally adjust in 10cm, and can rebound to the operator weight comfortably and safely. The seamless cover of the seat is waterproof and durable, which gives the operator a comfortable manipulation environment.

Adjustable Steering Wheel

Our steering wheel has ample adjustments fore-and-art to suit each operator.

Cabin

(This function belongs to option not for standard model)

Our cabin support comfort environment for operator, strong cabin will also give well protection. Also you can install in air condition or Heater for extreme working environment or getting more comfortable operate environment. Furthermore, you'll never worry about inconvenience maintenance for Forklifts. Our design can suit all your mentioned.

Reliable Engine

Maas choose world famous brand name CUMMINS & ISUZU diesel engine for our Forklifts.

For CUMMINS, the high displacement and power output of the 4-cylinder naturally aspirated A2000/A2300 45-60 hp (34-45 kW) and B3.3 60-85 hp (45-63 kW) engines offer big power in a small cost-efficient package. With Cummins legendary standards for reliability and durability, result in superior performance every day, every month and every year. CUMMINS engines can meet all current Tier 3/Stage 3 standards.

ISUZU C240, 4JG2 and 6BG1 engine is well known as its High Output, Low Fuel Consumption and Low Emission; Low Noise; High Reliability and Durability; Easy Maintenance and Operation. ISUZU engines can meet EU 3 standards.

Engine & power train

Engine available: CUMMINS & ISUZU
Exhaust gas purifier (catalytic muffler) (Diesel)
Spark arrester
Upward exhaust muffler
LPG swing down bracket(LPG)
PSD Axle

Exterior

Fuel cap with key
Steel cabin
Steel cabin with fan
Steel cabin with aircondition
Steel cabin with heater
Rear view mirrors (pair)
Fire extinguisher

Tire

Air tire
Solid tire
Color non-marking tire
Double front tire

Mast

2-stage free view mast
The mast enables a wide view with excellent forward visibility.

2-stage full free view mast
This is ideal for sites with height limitations, where the large free lift is required.

3-stage full free view mast
The mast extends in three stages and high level loading is easily performed.

Attachments

Attachments available: KAUP & CASCADE

Side shifter	Fork positioner

Rotating roll clamp	Bale clamp

Push-Pulls	Multi Pallet Handlers

Remarks: Other options available on request

1-1.5 Ton

Characteristic	1	Model			CPCD10	CPCD15
	2	Power type			Diesel	Diesel
	3	Rated capacity		kg	1000	1500
	4	Load center		mm	500	500
	5	Lift height		mm	3000	3000
	6	Fork size	L'W´T	mm	920x100x35	920x100x35
	7	Mast tilt angle F/R		º	6/12	6/12
	8	Turning radius		mm	1990	1990
	9	Ground clearance		mm	115	115
	10	Overhead guard height		mm	2045	2045
	11	Fork overhang		mm	396	396
Performance	12	Max driving speeds (with load)		km/h	15	15
	13	Max lifting speeds (with load)		mm/s	480	480
	14	Max grade ability (with load)		%	20	20
Dimensions	15	Overall length (without forks)		mm	2268	2268
	16	Overall width		mm	1070	1070
	17	Overall height fork raised (with backrest)		mm	4020	4020
	18	Mast height		mm	1995	1995
Chassis	19	Front tyres			6.50-10-10PR	6.50-10-10PR
	20	Rear tyres			5.00-8-8PR	5.00-8-8PR
	21	Wheelbase		mm	1400	1400
	22	Tread	Front/ Rear	mm	910/900	910/900
	23	Self Weight		kg	2700	2700
Drive	24	Battery Voltage/Capacity		V/Ah	12/65	12/65
	25	Engine	Model		NC485BPG	NC485BPG
	26		Rated output	kw/r.p.m	30/2600	30/2600
	27		Rated torque	N.m/r.p.m	131/1800	131/1800
	28		NO.of cylinders		4	4
	29		Displancement	L	2.27	2.27
	30		Fuel tank capacity	L	38	38
	31	Transmission number of speed	number of speed F/R		2/2 MT(1/1 AT)	2/2 MT(1/1 AT)
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

2-2.5 Ton

Characteristic	1	Model			CPCD20	CPCD25
	2	Power type			Diesel	Diesel
	3	Rated capacity		kg	2000	2500
	4	Load center		mm	500	500
	5	Lift height		mm	3000	3000
	6	Fork size	L´W´T	mm	1070x122x40	1070x122x40
	7	Mast tilt angle F/R		º	6/12	6/12
	8	Turning radius		mm	2240	2240
	9	Ground clearance		mm	120	120
	10	Overhead guard height		mm	2140	2140
	11	Fork overhang		mm	472	477
Performance	12	Max driving speeds (with load)		km/h	20	20
	13	Max lifting speeds (with load)		mm/s	450	450
	14	Max grade ability (with load)		%	20	20
Dimensions	15	Overall length (without forks)		mm	2525	2582
	16	Overall width		mm	1200	1200
	17	Overall height fork raised (with backrest)		mm	4020	4020
	18	Mast height		mm	2060	2060
Chassis	19	Front tyres			7.00-12-12PR	7.00-12-12PR
	20	Rear tyres			6.00-9-10PR	6.00-9-10PR
	21	Wheelbase		mm	1625	1625
	22	Tread	Front/ Rear	mm	960/980	960/980
	23	Self Weight		kg	3500	3850
Drive	24	Battery Voltage/Capacity		V/Ah	12/100	12/100
	25	Engine	Model		C240	C240
	26		Rated output	kw/r.p.m	34.5/2500	34.5/2500
	27		Rated torque	N.m/r.p.m	139/1800	139/1800
	28		NO.of cylinders		4	4
	29		Displancement	L	2.369	2.369
	30		Fuel tank capacity	L	60	60
	31	Transmission number of speed	number of speed F/R		2/2 MT(1/1 AT)	2/2 MT(1/1 AT)
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

3-4 Ton

Characteristic	1	Model			CPCD30	CPCD35	CPCD40
	2	Power type			Diesel	Diesel	Diesel
	3	Rated capacity		kg	3000	3500	4000
	4	Load center		mm	500	500	500
	5	Lift height		mm	3000	3000	3000
	6	Fork size	L´W´T	mm	1070x125x45	1070x125x50	1070x125x50
	7	Mast tilt angle F/R		º	6/12	6/12	6/12
	8	Turning radius		mm	2400	2500	2700
	9	Ground clearance		mm	120	120	120
	10	Overhead guard height		mm	2170	2170	2170
	11	Fork overhang		mm	505	505	505
Performance	12	Max driving speeds (with load)		km/h	20	20	20
	13	Max lifting speeds (with load)		mm/s	430	430	400
	14	Max grade ability (with load)		%	20	20	20
Dimensions	15	Overall length (without forks)		mm	2630	2755	2905
	16	Overall width		mm	1250	1250	1250
	17	Overall height fork raised (with backrest)		mm	4060	4060	4060
	18	Mast height		mm	2090	2090	2100
Chassis	19	Front tyres			28x9-15-12PR	28x9-15-12PR	250-15-16PR
	20	Rear tyres			6.50-10-10PR	6.50-10-10PR	6.50-10-10PR
	21	Wheelbase		mm	1625	1750	1900
	22	Tread	Front/ Rear	mm	1000/980	1000/980	1034/980
	23	Self Weight		kg	4400	4650	4850
Drive	24	Battery Voltage/Capacity		V/Ah	12/100	12/100	12/100
	25	Engine	Model		C240	4JG2	4JG2
	26		Rated output	kw/r.p.m	34.5/2500	44.9/2450	44.9/2450
	27		Rated torque	N.m/r.p.m	139/1800	184.7/1800	184.7/1800
	28		NO.of cylinders		4	4	4
	29		Displancement	L	2.369	3.059	3.059
	30		Fuel tank capacity	L	60	62	65
	31	Transmission	number of speed F/R		2/2 MT(1/1AT)	2/2 MT(1/1AT)	2/2 MT(1/1AT)
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

4-5 Ton

Characteristic	1	Model			CPCD40	CPCD45	CPCD50
	2	Power type			Diesel	Diesel	Diesel
	3	Rated capacity		kg	4000	4500	5000
	4	Load center		mm	500	500	500
	5	Lift height		mm	3000	3000	3000
	6	Fork size	L´W´T	mm	1070x150x50	1070x150x50	1070x150x50
	7	Mast tilt angle F/R		º	6/12	6/12	6/12
	8	Turning radius		mm	2835	2835	2835
	9	Ground clearance		mm	120	120	120
	10	Overhead guard height		mm	2275	2275	2275
	11	Fork overhang		mm	550	550	550
Performance	12	Max driving speeds (with load)		km/h	20	20	20
	13	Max lifting speeds (with load)		mm/s	380	380	380
	14	Max grade ability (with load)		%	20	20	20
Dimensions	15	Overall length (without forks)		mm	3115	3115	3115
	16	Overall width		mm	1480	1480	1480
	17	Overall height fork raised (with backrest)		mm	4100	4100	4100
	18	Mast height		mm	2210	2210	2210
Chassis	19	Front tyres			28x12.5-15	28x12.5-15	28x12.5-15
	20	Rear tyres			7.00-12	7.00-12	7.00-12
	21	Wheelbase		mm	2000	2000	2000
	22	Tread	Front/ Rear	mm	1230/1190	1230/1190	1230/1190
	23	Self Weight		kg	6150	6370	6650
Drive	24	Battery Voltage/Capacity		V/Ah	24/65´2	24/65´2	24/65?á2
	25	Engine	Model		Cummins B3.3-C80	Cummins B3.3-C80	Cummins B3.3-C80
	26		Rated output	kw/r.p.m	60/2200	60/2200	60/2200
	27		Rated torque	N.m/r.p.m	292/1600	292/1600	292/1600
	28		NO.of cylinders		4	4	4
	29		Displancement	L	3.3	3.3	3.3
	30		Fuel tank capacity	L	100	100	100
	31	Transmission	number of speed F/R		2/1 AT	2/1 AT	2/1 AT
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

5-7 Ton

Characteristic	1	Model			CPCD50	CPCD60	CPCD70
	2	Power type			Diesel	Diesel	Diesel
	3	Rated capacity		kg	5000	6000	7000
	4	Load center		mm	600	600	600
	5	Lift height		mm	3000	3000	3000
	6	Fork size	LxWxT	mm	1220x150x50	1220x150x60	1220x150x65
	7	Mast tilt angle F/R		º	6/12	6/12	6/12
	8	Turning radius		mm	3300	3300	3300
	9	Ground clearance		mm	170	170	170
	10	Overhead guard height		mm	2450	2450	2450
	11	Fork overhang		mm	595	595	595
Performance	12	Max driving speeds (with load)		km/h	24	24	24
	13	Max lifting speeds (with load)		mm/s	300	300	300
	14	Max grade ability (with load)		%	20	20	20
Dimensions	15	Overall length (without forks)		mm	3540	3540	3540
	16	Overall width		mm	1910	1910	1910
	17	Overall height fork raised (with backrest)		mm	4380	4380	4380
	18	Mast height		mm	2732	2732	2732
Chassis	19	Front tyres			8.25-15-14PR	8.25-15-14PR	8.25-15-14PR
	20	Rear tyres			8.25-15-14PR	8.25-15-14PR	8.25-15-14PR
	21	Wheelbase		mm	2300	2300	2300
	22	Tread	Front/ Rear	mm	1400/1534	1400/1534	1400/1534
	23	Self Weight		kg	7900	8160	8400
Drive	24	Battery Voltage/Capacity		V/Ah	24/75x2	24/75x2	24/75x2
	25	Engine	Model		6BG1	6BG1	6BG1
	26		Rated output	kw/r.p.m	82/2000	82/2000	82/2000
	27		Rated torque	N.m/r.p.m	415/1560	415/1560	415/1560
	28		NO.of cylinders		6	6	6
	29		Displancement	L	6.494	6.494	6.494
	30		Fuel tank capacity	L	140	140	140
	31	Transmission	number of speed F/R		2/2 AT	2/2 AT	2/2 AT
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

8-10 Ton

Characteristic	1	Model			CPCD80	CPCD100
	2	Power type			Diesel	Diesel
	3	Rated capacity		kg	8000	10000
	4	Load center		mm	600	600
	5	Lift height		mm	3000	3000
	6	Fork size	L´W´T	mm	1220x170x70	1220x170x70
	7	Mast tilt angle F/R		º	6/12	6/12
	8	Turning radius		mm	3700	3900
	9	Ground clearance		mm	250	245
	10	Overhead guard height		mm	2585	2585
	11	Fork overhang		mm	700	718
Performance	12	Max driving speeds (with load)		km/h	26	26
	13	Max lifting speeds (with load)		mm/s	380	310
	14	Max grade ability (with load)		%	20	20
Dimensions	15	Overall length (without forks)		mm	3940	4260
	16	Overall width		mm	2165	2245
	17	Overall height fork raised (with backrest)		mm	4420	4330
	18	Mast height		mm	2700	2850
Chassis	19	Front tyres			9.00-20-14PR	9.00-20-14PR
	20	Rear tyres			9.00-20-14PR	9.00-20-14PR
	21	Wheelbase		mm	2500	2500
	22	Tread	Front/ Rear	mm	1600/1700	1600/1700
	23	Self Weight		kg	10950	12510
Drive	24	Battery Voltage/Capacity		V/Ah	24/65x2	24/65x2
	25	Engine	Model		6BG1	6BG1
	26		Rated output	kw/r.p.m	82/2000	82/2000
	27		Rated torque	N.m/r.p.m	415/1560	415/1560
	28		NO.of cylinders		6	6
	29		Displancement	L	6.494	6.494
	30		Fuel tank capacity	L	140	140
	31	Transmission number of speed	number of speed F/R		2/2 AT	2/2 AT
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

MaaS Diesel Forklifts

Specification Data